What Are The Components Of Structured Cabling?

What Are The Components Of Structured Cabling?

There are several types of structured cabling in Dubai. Listed below are some of the main components. These include transmission media, main and intermediate cross-connects, terminations, and horizontal cabling. To learn more about these types of structured cabling, read on! Until next time, happy networking! And remember, there is a good reason why structured cabling is so important. It is not just for the technology it provides but also for the safety of people around it.

Horizontal cabling:

Installing horizontal cabling can be easy if the wiring runs along the ceiling or walls. However, the cables must be installed carefully because EMIs from photocopying machines and elevators can damage them. If you need to install horizontal cabling, you can use multimode fiber-optic cabling, which can run longer distances. Similarly, for voice and data transmission, you can use UTP cabling. Patch cables should be no longer than 6 meters to avoid interferences from other components.

Transmission media:

There are several different types of transmission media for structured cabling. Choosing the best one for your network depends on several factors, including the intended use of the system, ease of installation, and maintenance.

Main and intermediate cross-connects:

The building and floor distributors are the two main cross-connects in a structured cabling system. In a multitenant building, both main and intermediate cross-connects may be located at the same location. In other buildings, these connectors may be separated by a distance, so they are more economical to bypass.


Before starting to terminate cables in your structured cabling system, you should plan where they should be terminated. Ensure that the cable length is sufficient and untwisting the wires just enough to press them down. Next, you should label the wall outlets and ensure the cables are placed in a tidy bundle. You should label the end of each cable with its manufacturer and product type. You may need to bundle multiple cables to reach a specific area.

Entrance facility:

Structured cabling has many subsystems: entrance facility, main equipment room, telecommunications rooms, individual workstations, and backbone cabling. Entrance facilities connect outside cabling to the building’s backbone cabling system. These components include network demarcation points, connecting hardware, protection devices, and other equipment connected to network providers. The network demarcation point, also known as NFID, is used to identify which cables belong to the network of an outside service provider.